Operation CHARM: Car repair manuals for everyone.
Home >> Dodge and Ram >> 2007 >> Nitro 2WD V6-3.7L >> Repair and Diagnosis >> Lighting and Horns >> Fog/Driving Lamp >> Service and Repair >> Installation
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Installation






LAMP





1. Position the front fog lamp to the receptacle from the front of the front bumper fascia (3). Be certain that the two alignment pins (2) on the back of the lamp housing are engaged in the alignment holes in the fascia receptacle.

2. Reach up between the lower edge of the front fascia and the front of the front wheel house splash shield to install and tighten the two screws (1) that secure the lamp to the back of the fascia. Tighten the screws to 2 Nm (18 in. lbs.).

3. Reconnect the front end module wire harness connector (4) to the front fog lamp bulb connector receptacle.

4. Reconnect the battery negative cable.

5. Confirm proper front fog lamp alignment.
pro multis · About Operation CHARM