Removal

REMOVAL
1. Before proceeding with the following repair procedure, review all warnings and cautions.

2. Remove inside rear view mirror.

3. Remove the wiper arms.





4. Remove the hood seal (3).

5. Use a trim stick C-4755 or equivalent, separate the cover assembly from the a-pillar.

6. Remove the four push pins (2) and remove the cowl grille (1) from the body (4).





7. Using a trim stick C-4755 or equivalent, remove the push pin (1).

8. Remove the windshield A-pillar molding (2) and clips (3) from the windshield A-pillar.





9. Cut urethane bonding from around windshield using a suitable sharp cold knife. A pneumatic cutting device can be used if available.

10. Remove windshield from vehicle.