Removal

REMOVAL




1. Using a trim stick C-4755 or equivalent, pry the shift bezel out of the floor console.





2. Open the console lid (1) and remove the two screws (2).

3. Using a trim stick C-4755 or equivalent, release the fasteners at all of the locations around the floor console trim panel (3).

4. Lift up and rearward to release the panel (3) from the floor console.

5. Disconnect the electrical connectors (4) from the panel (3).





6. Remove the ash cup (3) from the console (1).

7. Remove the bin (4) from the console (1).

8. Remove the three screws (2) from the front of the console (1).

9. Remove the two screws (5) from the rear of the console (1).

10. Lift the console (1) at the back and remove.