Installation

INSTALLATION




1. Install the cables (2) into the axle bracket.
2. Reconnect the cable to the park brake lever (1).
3. Install the park brake cable between the stabilizer bar retainer bracket and the mount. Tighten the bolts to 47 Nm (35 ft. lbs.).




4. Push the cables (1) through the floor (3) and seat the grommets (2).




5. Reconnect the two cables (1) to the front mount and then to the equalizer (2).




6. Lay the carpet (2) back down in the rear.
7. Install the rear seat.
8. Remove the lock out device on the lever.
9. Adjust the park brake shoes.
10. Test the parking brake.