Removal

REMOVAL

1. Lock out the parking brake cables.




2. Remove the rear seat.
3. Pull the carpet forward far enough in the rear to gain access to the two parking brake cables through the floor.




4. Disconnect the two cables (1) from the equalizer (2) and then remove the cables front the mount using a proper sized box end wrench over the tangs.




5. Push the cables (1) through the floor (3) with the grommets (2).




6. Remove the stabilizer bar bracket retainer.
7. Remove the park brake cable from the stabilizer bar retainer and mount.
8. Remove the cable from the axle bracket with a proper sized box end wrench over the tangs.
9. Remove the brake cable (2) from the brake lever (3).