Pressure Hose

PRESSURE HOSE




1. Install the pressure hose (2) at the gear.
2. Install pressure line (3) into pump. Thread pressure line tube nut into pump and tighten to 31 Nm (275 in. lbs.).




3. Install the pressure hose mounting bolts (2) to the frame. Tighten to 12 Nm (105 in. lbs.).
4. Install power steering belt.
5. Install the fan shroud.
6. Install the washer/coolant reservoir assembly.
7. Install air cleaner housing.
8. Fill and bleed power steering system.
9. Inspect for leaks.