Canada- Recall - G25 Reprogram TIPM-Engine Stalling
BulletinG25
Issue Date
2007-07-10
IMPORTANT
DEALER SERVICE INSTRUCTIONS
SAFETY RECALL G25 - REPROGRAM TIPM - ENGINE STALLING
MODELS:
2007 (JK) Jeep (R) Wrangler
2007 (KA ) Dodge Nitro
NOTE:
This recall applies only to the above vehicles built through January 22, 2007 (MDH 01-22-00).
^ The Totally Integrated Power Module (TIPM) on about 8, 800 of the above vehicles was programmed with software that may allow the engine to stall under certain operating conditions.
This could cause a crash without warning.
^ To correct this condition, the Totally Integrated Power Module (TIPM) must be reprogrammed (flashed).
NOTE:
Wrangler models with a disconnecting stabilizer bar (sway bar) option (sales code SHG) require additional unique steps in the flash procedure.
Recall and Parts Information
Canadian Recall Service Instructions and Part Numbers can be different. Always use the attached Canadian Recall Notification for service instructions and parts information.
This Canadian Recall Notification can also be found in DealerCONNECT - See below:
DealerCONNECT > Service > In the Repair section TechCONNECT > 30 - CANADIAN RECALLS
The V.I.N. range for vehicles involved in this campaign is as follows:
1J4FA54147L100337 - 1J 4FA54177L155252
1D8GT28K17W500359 - 1D8GU28K17W634625
DEALER VIN LISTS Located in DealerCONNECT - Global Recall System (GRS)
GRS has been developed to provide dealers with an up-to-date list of involved vehicles by recall number and by dealer code. Owners known to DaimlerChrysler are also listed. Involved vehicles will be removed from the GRS within several days of submitting repair claims.
To use the GRS in DealerCONNECT, you first need to click on the Service tab and then in the Repair section click on Global Recall System. Your dealer's VIN list for each Recall can be sorted by: Unsold Vehicles (at the time of Recall launch), Phone Number, City Name, Zip Code (Postal Code) or VIN.
Dealer Information
Owner Letter