Removal

REMOVAL





The EVAP canister (1) is located under the vehicle behind the plastic splash shield (4) used for the left/rear tire. The ESIM switch (2) is attached to the EVAP canister.

1. Raise and support vehicle.

2. Clean dirt or debris from canister vacuum lines.

3. Disconnect electrical connector (3) at ESIM switch (2).

4. Disconnect rubber hose (6) from ESIM switch (2).

5. Disconnect quick-connect fitting (5) at EVAP canister.




6. Remove nut/bolt (1) at front of canister mounting bracket (2).




7. To remove canister, pull straight forward until pins (1) have cleared bracket (2).