Installation

INSTALLATION




1. Install fuel injector(s) (3) into fuel rail assembly (4) and install retaining clip(s) (2).

2. If same injector(s) is being reinstalled, install new O-ring(s). Two different O-rings are being used. These can be easily identified by color. Install black O-ring at intake manifold end of injector. Install red/rust colored O-ring at fuel rail end of injector.

3. Apply a small amount of clean engine oil to each injector O-ring. This will aid in installation.

4. Install fuel rail. (Install all high-pressure lines to rail)

5. Start engine and check for fuel leaks.