Installation

INSTALLATION




1. Install transmission on engine.
2. On 3.7L engine tighten bolts (1) to 41 Nm (30 ft. lbs.). Tighten bolts (2) to 67 Nm (50 ft. lbs.). Tighten bolts (3) to 54 Nm (40 ft. lbs.).




3. On 2.8L diesel engine tighten bolts (1) to 41 Nm (30 ft. lbs.). Tighten bolts (2) to 67 Nm (50 ft. lbs.). Tighten bolts (3) to 54 Nm (40 ft. lbs.).




4. Vehicles with 3.7L engine install exhaust pipe with converters (3).




5. Install transmission crossmember (2) and tighten bolts to 47 Nm (35 ft. lbs.). Install transmission mount (1) bolts and tighten to 47 Nm (35 ft. lbs.).




6. Install backup lamp (2) wiring connector (1).




7. Install clutch slave cylinder (2) and mounting nuts (1).




8. Install transfer case (1) on transmission (2), if equipped.
9. Install propeller shaft/shafts with reference marks aligned.




10. Remove fill plug (1) and fill transmission to specifications.




11. Install inner shift boot (3), shift lever (2) and lever screw (1).




12. Install shift boot (2), shift knob (1) and counsel.
13. Connect battery.