Removal

REMOVAL




1. Disconnect negative battery cable.
2. Remove counsel, shift knob (1) and boot (2).




3. Remover shift lever screw (1), lever (2) and inner boot (3).




4. With vehicle in neutral, position vehicle on hoist.
5. Remove drain plug (1) and drain fluid.




6. Mark installation reference marks on propeller shaft/shafts and remove shafts.
7. Remove transfer case shift cable, wiring connector and vent hose, if equipped.
8. Remove transfer case (1) from transmission (2), if equipped.




9. Support transmission with jack.
10. Remove transmission mount (1) bolts and crossmember (2) bolts. Remove transmission mount (1) with crossmember (2).




11. Vehicles with 3.7L engine, remove exhaust pipe with converters (3).




12. Remove clutch slave cylinder nuts (1) and remove cylinder (2).




13. Remove backup lamp switch (1) wiring connector (2).




14. Remove starter bolts and remove starter.
15. Remove transmission bolts (1,2,3) on 3.7L engine and remove transmission.




16. Remove transmission bolts (1,2,3) on 2.8L diesel engine and remove transmission.