Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Installation

INSTALLATION

1. Clean rear timing belt cover O-ring (1) sealing surfaces and grooves. Lubricate new O-rings with Mopar(R) Dielectric Grease or equivalent to facilitate assembly.
2. Position NEW O-rings on cover (2).

3. Install rear timing belt cover (4). Tighten bolts to the following specified torque:

- M10 (2, 5) - 54 Nm (40 ft. lbs.)
- M8 (1) - 28 Nm (20 ft. lbs.)
- M6 (3) - 12 Nm (105 in. lbs.)

4. Install camshaft sprockets.
5. Install timing belt.