Operation CHARM: Car repair manuals for everyone.
Home >> Dodge and Ram >> 2007 >> Nitro 4WD V6-4.0L >> Repair and Diagnosis >> Powertrain Management >> Computers and Control Systems >> Knock Sensor >> Service and Repair >> Removal
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Removal






REMOVAL - 4.0L





Only one sensor (1) is used with the 4.0L engine. It is attached to the top of the cylinder block below the intake manifold.

1. Remove intake manifold.

2. Disconnect knock sensor pigtail harness from engine wiring harness. This connection is made near front of engine (3).

3. Remove sensor mounting bolt (2). Note foam strip on bolt threads. This foam is used only to retain the bolt to sensor for plant assembly. It is not used as a sealant. Do not apply any adhesive, sealant or thread locking compound to this bolt.

4. Remove sensor from engine.
pro multis · About Operation CHARM