Operation CHARM: Car repair manuals for everyone.
Home >> Dodge and Ram >> 2007 >> RAM 2500 Truck 4WD V8-5.7L VIN D >> Repair and Diagnosis >> Cruise Control >> Cruise Control Servo >> Service and Repair >> Installation
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Installation






INSTALLATION

A speed control servo is used only with the 4.7L V-8 engine.

1. Position servo to mounting bracket .

2. Align hole in cable connector with hole in servo pin. Install cable-to-servo retaining clip .

3. Insert servo mounting studs through holes in servo mounting bracket.

4. Install 2 servo-to-mounting bracket nuts and tighten to 60 in. lbs. (7 Nm).

5. Position servo assembly to correct mounting lugs on battery tray and install 3 screws. Tighten to 30 in. lbs. (4 Nm).

6. Connect vacuum line at servo.

7. Connect electrical connector at servo.

8. Connect servo cable to throttle body.

9. Install left-front wheel-well liner.

10. Connect negative battery cable to battery (connect both cables if diesel).

11. Before starting engine, operate accelerator pedal to check for any binding.
pro multis · About Operation CHARM