Operation CHARM: Car repair manuals for everyone.
Home >> Dodge and Ram >> 2007 >> RAM 3500 Truck 4WD L6-5.9L DSL Turbo VIN C >> Repair and Diagnosis >> Powertrain Management >> Computers and Control Systems >> Engine Control Module >> Service and Repair >> Engine Control Module - Installation
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Engine Control Module - Installation






5.9L DIESEL





CUMMINS FUEL SYSTEM COMPONENTS





Do not apply paint to ECM or a poor ground will result.

1. Position the ECM (16) to the ECM support bracket and install the five mounting bolts . Tighten bolts to 24 Nm (18 ft. lbs.).

2. Check pin connectors in ECM, 50-way and 60-way connectors for corrosion or damage. Repair as necessary.

3. Clean pins in the 50-way and 60-way electrical connectors with a electrical contact cleaner.

4. Install the 50-way and 60-way connectors to ECM. Tighten connector bolts to 3 Nm (27 in. lbs.).

5. Reconnect both negative battery cables.

6. Use a diagnostic scan tool to erase any Diagnostic Trouble Codes (DTC's) from ECM.
pro multis · About Operation CHARM