Removal

REMOVAL

1. Disconnect the battery negative cable.
2. Remove the engine cover.
3. Remove air filter housing.




4. Disconnect the left electrical connector (1) or the right electrical connector (2) at the left intake manifold swirl flap position sensor (5) or right intake manifold swirl flap position sensor (4).
5. Remove the left intake manifold swirl flap position sensor bolt (3) or the right intake manifold swirl flap position sensor bolt (4).
6. Remove the left intake manifold swirl flap position sensor (5) or the right intake manifold swirl flap position sensor (6) from the intake manifold.