Operation CHARM: Car repair manuals for everyone.
Home >> Dodge and Ram >> 2008 >> Charger V6-2.7L >> Repair and Diagnosis >> Starting and Charging >> Charging System >> Alternator >> Service and Repair >> Generator - Installation
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Generator - Installation







2.7L





1. Position generator (2) to engine and install mounting bolts (1). Tighten bolts to 65 Nm (48 ft. lbs.).




2. Connect field wire connector (4) into generator.
3. Install B+ terminal (1) and nut (2) to generator mounting stud. Tighten nut to 13 Nm (115 in. lbs.)
4. Snap plastic protective cover (3) to B+ terminal.

CAUTION: When installing a serpentine accessory drive belt, the belt MUST be routed correctly. The water pump will be rotating in the wrong direction if the belt is installed incorrectly, causing the engine to overheat.

5. Install drive belt, Accessory Drive Belt - Installation.
6. Connect the negative battery cable and tighten nut to 5 Nm (45 in. lbs.).
pro multis · About Operation CHARM