Operation CHARM: Car repair manuals for everyone.
Home >> Dodge and Ram >> 2008 >> Durango 2WD V8-4.7L >> Repair and Diagnosis >> Maintenance >> Hoses >> Coolant Line/Hose >> Service and Repair >> Installation
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Installation







INSTALLATION





1. Position bypass hose clamps to center of hose.
2. Install bypass hose to engine.
3. Secure both hose clamps.
4. Install generator-A/C mounting bracket assembly to engine. Tighten bolts (number 1 and 2 ) to 54 Nm (40 ft. lbs.) torque. Tighten bolts (number 3 ) to 40 Nm (30 ft. lbs.) torque.
5. Install a new O-ring to the heater hose coolant return tube. Coat the new O-ring with antifreeze before installation.
6. Install coolant return tube and its mounting bolt to engine.
7. Connect throttle body control cables.
8. Install oil dipstick mounting bolt.
9. Install idler pulley. Tighten bolt to 54 Nm (40 ft. lbs.) torque.
10. Install drive belt Accessory Drive Belt - Installation.
11. Install air cleaner assembly.
12. Install upper radiator hose to radiator.
13. Connect wiring harness to A/C compressor.
14. Connect battery negative cable.
15. Fill cooling system Service and Repair.
16. Start and warm the engine. Check for leaks.
pro multis · About Operation CHARM