System Specifications
SPECIFICATIONS - 6.7L DIESEL
General Description:
Pistons:
Piston Pins:
Piston Rings:
Connecting Rods:
Torque Specifications
Connecting Rod Cap
Step 1 30 Nm (22 Ft.Lb.)
Step 2 60 Nm (44 Ft.Lb.)
Step 3 Rotate 60 Degrees
CAUTION: The 5.9L and 6.7L engine has different torque procedures for new and previously installed main bearing capscrews. Failure to use the correct torque procedure can result in engine damage.
Main Bearing Cap-Bolts (Previously Used)
Step 1 60 Nm (44 Ft.Lb.)
Step 2 80 Nm (59 Ft.Lb.)
Step 3 Rotate 90 Degrees
Main Bearing Cap-Bolts (New)
Step 1 120 Nm (89 Ft.Lb.)
Step 2 Loosen Completely
Step 3 60 Nm (44 Ft.Lb.)
Step 4 85 Nm (63 Ft.Lb.)
Step 5 Rotate 120 Degrees