Installation-Pick Up Models

INSTALLATION-PICK UP MODELS





The EGR Temperature Sensor (1) is located on the intake manifold, below, and to the rear of the EGR valve (5).





1. A pigtail wiring harness (3) connects the sensor to the engine wiring harness.
2. Position sensor probe (1) into intake manifold.
3. Screw and tighten nut (2) into intake manifold.
4. Connect electrical connector (4) to engine wiring harness.




5. Install EGR valve cover (2).




6. Install EGR crossover tube cover (1) and four cover bolts (2).