Operation CHARM: Car repair manuals for everyone.
Home >> Dodge and Ram >> 2008 >> Sprinter 3500 V6-3.0L DSL Turbo >> Repair and Diagnosis >> Heating and Air Conditioning >> Control Assembly >> Service and Repair >> A/C Heater Control - Installation >> Automatic Temperature Control (ATC)
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Automatic Temperature Control (ATC)







AUTOMATIC TEMPERATURE CONTROL (ATC)





1. Position the A/C-heater control (1) to the instrument panel.
2. Connect the wire harness connectors (4) to the back of the A/C-heater control and engage the connector locks (2). Make sure the connector locks are fully engaged.




3. Install the A/C-heater control (2) into the instrument panel (3).
4. Install the four screws (1) that secure the A/C-heater control to the instrument panel. Tighten the screws to 2 Nm (17 in. lbs.).
5. Install the instrument panel center bezel Instrument Panel Center Bezel - Installation.
6. Reconnect the negative battery cable.
7. If replacing the A/C-heater control, initiate the Actuator Calibration function using a scan tool.
pro multis · About Operation CHARM