Operation CHARM: Car repair manuals for everyone.
Home >> Dodge and Ram >> 2008 >> Sprinter 3500 V6-3.0L DSL Turbo >> Repair and Diagnosis >> Powertrain Management >> Relays and Modules - Powertrain Management >> Relays and Modules - Computers and Control Systems >> Engine Control Module >> Service and Repair >> Engine Control Module - Installation
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Engine Control Module - Installation







INSTALLATION

NOTE: If a replacement (new) ECM is being installed, the scan tool must be used to program (flash) the new ECM with vehicle specific information.

NOTE: Any time a new ECM is installed, the injector quantity adjustment procedure, also called injector classification must be performed.

1. Position the ECM into the guide of the retaining bracket.
2. Carefully push the ECM in to the bracket.
3. Connect the ECM wiring harness connectors.
4. Connect negative battery cable.
5. Using the scan tool, perform the "ECU Auto Replacement", "Diesel Particulate Filter (New) Initialization", and "Engine ECU Replaced (Drive Authorization)" procedures.Testing and Inspection
pro multis · About Operation CHARM