Operation CHARM: Car repair manuals for everyone.
Home >> Dodge and Ram >> 2008 >> Viper SRT-10 V10-8.4L >> Repair and Diagnosis >> Powertrain Management >> Ignition System >> Ignition Cable >> Service and Repair >> Removal
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Removal







REMOVAL





CAUTION: Do not use pliers and do not pull the ignition cable at an angle. Damage to the insulation, cable terminal or the spark plug may occur.

NOTE: Use the following procedure when removing the high tension cable from the spark plug. Grasp the ignition cable boot as close as possible to the spark plug. Rotate the cable boot 1/2 turn slightly and pull straight away from the spark plug in a steady motion. For the coil side grasp as close to the end of the cable boot and pull away in the same fashion.

1. Disconnect and isolate negative battery cable at battery.
2. Remove ignition cables from coils.
3. Remove ignition cables from spark plugs.
pro multis · About Operation CHARM