Operation CHARM: Car repair manuals for everyone.
Home >> Dodge and Ram >> 2008 >> Viper SRT-10 V10-8.4L >> Repair and Diagnosis >> Relays and Modules >> Relays and Modules - Powertrain Management >> Relays and Modules - Computers and Control Systems >> Engine Control Module >> Service and Repair >> Powertrain Control Module - Installation
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Powertrain Control Module - Installation







INSTALLATION





If the powertrain control module (PCM) is replaced of usage, update the mileage and vehicle identification number (VIN) in the new PCM. Use the scan tool to change the mileage and VIN in the PCM. If this step is not done a Diagnostic Trouble Code (DTC) may be set. Refer to the appropriate Powertrain Diagnostic and the scan tool. Testing and Inspection

1. Install electrical connectors (5) to PCM (2).
2. Install PCM (2) to left side inner fender support (1)
3. Install cover (3) and mounting bolts (4). Tighten bolts to 7 Nm (62 in. lbs.)




4. Connect negative battery cable. Tighten to 10 Nm (90 in. lbs.)
5. Reprogram radio and clock.
6. Using scan tool, program the all necessary information into the PCM. Testing and Inspection.
pro multis · About Operation CHARM