Operation CHARM: Car repair manuals for everyone.
Home >> Dodge and Ram >> 2008 >> Viper SRT-10 V10-8.4L >> Repair and Diagnosis >> Relays and Modules >> Relays and Modules - Restraints and Safety Systems >> Air Bag Control Module >> Service and Repair >> Occupant Restraint Controller - Installation
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Occupant Restraint Controller - Installation







INSTALLATION





1. Place the ORC (1) into center stack area and place in mounting location.

WARNING: Make sure ORC (1) is positioned properly on the floor tunnel with the arrow pointing forward. Failure to do so could result in personal injury or death.

2. Install the three retaining screws to the ORC. Tighten bolts to 13.5 Nm (120 in. lbs.).
3. Connect the two electrical connectors (3) to the ORC (1).
4. Install the cluster bezel Instrument Panel Cluster Bezel - Installation.
5. Install the center bezel Instrument Panel Center Bezel - Installation.
6. Install the center console Center Console - Installation.

WARNING: Do not connect the battery negative cable. Serious or fatal injury may result if the system test is not performed first. Testing and Inspection

7. Place battery access cover into place and install four bolts.
8. Close deck lid.
pro multis · About Operation CHARM