Intake Manifold
INTAKE MANIFOLD TORQUE AND SEQUENCE
Tighten bolts to 12 Nm (106 in. lbs.) as shown.
PLENUM COVER
Plenum cover bolts as shown 10 Nm (89 in. lbs.)
THROTTLE BODY TORQUE AND SEQUENCE
CAUTION: DO NOT OVER TORQUE. Over tightening can cause damage to the throttle body, gaskets, bolts and/or the intake manifold. The throttle body must be torqued in a mandatory torque sequence. Tighten in a criss - cross pattern to specification.
Tighten the throttle body bolts (3) in a mandatory torque criss - cross pattern sequence to 8 Nm (71 in. lbs.).