Cylinder Head Assembly

CYLINDER HEAD






Tighten the cylinder head bolts in four steps using the sequence shown:

Step 1: Tighten bolts 1-10 to 34 Nm (25 ft. lbs.) and bolts 11-15 to 20 Nm (15 ft. lbs.) in the sequence shown.
Step 2: Tighten bolts 1-1 0 to 54 Nm (40 ft. lbs.) and verify bolts 11-15 are 20 Nm (15 ft. lbs.) in the sequence shown.
Step 3: Rotate bolts 1-10 an additional 90° in the sequence shown.
Step 4: Tighten bolts 11-15 to 34 Nm (25 ft. lbs.) in the sequence shown.

INTAKE MANIFOLD





Intake Manifold - Retaining-Bolts 12 Nm (9 ft. lbs.)

EXHAUST MANIFOLD





Exhaust Manifold to Cylinder Head-Bolts 31 Nm (23 ft. lbs.)