Tire Monitoring System: Service and Repair
TPMS Reset ProcedurePerform one of the following to make the system learn a new sensor ID.
a. Use the TPM-RKE Analyzer 9936, with the Scan Tool to program the TPM Module with the tire pressure sensor ID. This is part of the TPM Diagnostic Verification Test. Tire Pressure Monitor (TPM) Verification Test
b. Once the vehicle has remained stationary for more than 20 minutes, drive vehicle for a minimum of 20 minutes while maintaining a continuous speed above 15 mph (24 km/h). During this time, the system will learn the new sensor ID. This is part of the TPM Diagnostic Verification Test. Tire Pressure Monitor (TPM) Verification Test