Operation CHARM: Car repair manuals for everyone.
Home >> Dodge and Ram >> 2009 >> Durango 2WD V6-3.7L >> Repair and Diagnosis >> Body and Frame >> Interior Moulding / Trim >> Console >> Service and Repair >> Overhead Console - Installation >> Overhead Console
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Overhead Console






OVERHEAD CONSOLE





1. Position the overhead console near the mounting location on the headliner.
2. Connect the infrared temperature sensor wire harness connector (1) (if equipped).
3. Connect the power sunroof/power liftgate switch wire harness connector (2) (if equipped).
4. Connect the reading lamp wire harness connector (3) (if equipped).
5. Connect the Electronic Vehicle Information Center (EVIC) module wire harness connector (4) (if equipped).





6. Align the snap clips on the overhead console housing with their receptacles in the overhead console bracket (2).





7. Push upward firmly and evenly on the sides of the overhead console housing (4) over the snap clip locations until the snap clips are fully engaged with the overhead console bracket.
8. Reconnect the battery negative cable.

pro multis · About Operation CHARM