Operation CHARM: Car repair manuals for everyone.
Home >> Dodge and Ram >> 2009 >> Durango 2WD V8-4.7L Flex Fuel >> Repair and Diagnosis >> Relays and Modules >> Relays and Modules - Accessories and Optional Equipment >> Parking Assist Control Module >> Service and Repair >> Park Assist Module - Installation
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Park Assist Module - Installation






INSTALLATION





1. Position the park assist module (5) to the left quarter inner panel, behind the power liftgate module (3) to the rear of the C-pillar (2) and above the left rear wheel housing.
2. Secure the module to the left quarter inner panel using three plastic push-in fasteners (4).
3. Reconnect the two body wire harness connectors (1) to the module connector receptacles.
4. Reinstall the trim onto the left quarter inner panel. Quarter Trim Panel - Installation.
5. Reconnect the battery negative cable. On vehicles equipped with the optional Hybrid Electric Vehicle (HEV) system, a technician trained in proper HEV service safety procedures must also reinstall the high voltage service disconnect into the high voltage battery pack.

pro multis · About Operation CHARM