Operation CHARM: Car repair manuals for everyone.
Home >> Dodge and Ram >> 2009 >> Durango 2WD V8-4.7L >> Repair and Diagnosis >> Body and Frame >> Seats >> Seat Temperature Element >> Testing and Inspection >> Front Seats
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Front Seats






HEATED SEAT ELEMENT





The wire harness connectors (2AND3) for the heating elements are located under the seat (1).

NOTE: When checking heated seat elements for continuity, be certain to move the heating element being checked. Moving the element, such as sitting in the seat will eliminate the possibility of an intermittent open in the element which would only be evident if the element was in a certain position. Failure to check the element in various positions could result in an incomplete test.

1. Locate and disconnect the seat electrical connector.
2. Check for continuity between the circuit leading in and out of the appropriate heated seat element. There should be continuity (less than 6 ohms). If OK, Testing and Inspection. If not OK, replace the heated seat element.

pro multis · About Operation CHARM