Operation CHARM: Car repair manuals for everyone.
Home >> Dodge and Ram >> 2009 >> Journey FWD V6-3.5L >> Repair and Diagnosis >> Powertrain Management >> Computers and Control Systems >> Knock Sensor >> Service and Repair >> Knock Sensor - Installation
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Knock Sensor - Installation






3.5L






CAUTION: Always use the specified torque when installing the knock sensor bolt. Over or under tightening the sensor mounting bolt will affect knock sensor performance, possibly causing improper spark control.

1. Install knock sensor. Tighten knock sensor to 20 Nm (15 ft. lbs.).
2. Route the knock sensor wire in the proper location.
3. Install upper intake manifold, Intake Manifold - Installation.





4. Connect the electrical connector.
5. Connect the negative battery cable.

pro multis · About Operation CHARM