Crankshaft Main Bearing

MAIN BEARING

Main Bearing Diametrical Clearance 0.032-0.062 mm (0.0013-0.0024 in.)
Bearing Clearance (Wear Limit) 0.070 mm (0.0027 in.)

Crankshaft
DIA Out-of-Round (MAX) 0.007 mm (0.0003 in.)
Diametrical Taper (MAX) 0.006 mm (0.00025 in.)
End Play 0.048-0.260 mm (0.002-0.010 in.)
End Play (MAX) 0.330 mm (0.013 in.)

Crankshaft Main Bearing Cap
Inner Main Cap Bolts 20 + 1/4 Turn Nm (15 + 1/4 Turn ft.lbs.)
Outer Main Cap Bolts 27 + 1/4 Turn Nm (20 + 1/4 Turn ft.lbs.)
Tie Bolts (Horizontal) 28 Nm (250 in.lbs)

NOTE: The main bearing cap bolts must be tightened in the proper sequence. First the inner main cap bolts, secondly the windage tray bolts, lastly the main cap tie (horizontal) bolts.