Operation CHARM: Car repair manuals for everyone.
Home >> Dodge and Ram >> 2009 >> Nitro 4WD V6-4.0L >> Repair and Diagnosis >> Powertrain Management >> Ignition System >> Knock Sensor >> Service and Repair >> Knock Sensor - Installation
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Knock Sensor - Installation






4.0L





1. Position sensor (3) to engine. Install and tighten mounting bolt to 10 Nm (7 ft. lbs.). Note foam strip on bolt threads. This foam is used only to retain the bolt to sensor for plant assembly. It is not used as a sealant. Do not apply any adhesive, sealant or thread locking compound to this bolt.





2. Install lower intake manifold (3) and fuel rail (1) Intake Manifold - Installation.





3. Install the upper intake manifold, EGR tube, PCV, Purge and power brake booster vacuum hosesIntake Manifold - Installation.
4. Fill the coolant system Service and Repair.
5. Connect the negative battery cable. Tighten nut to 4.5 Nm (40 in. lbs.).

pro multis · About Operation CHARM