Cylinder Head Assembly

CYLINDER HEAD





CYLINDER HEAD BOLTS





Using the sequence shown, tighten the cylinder head bolts 1 through 10 to 34 Nm (25 ft. lbs.).
Using the sequence shown, tighten the cylinder head bolts 11 through 15 to 20 Nm (15 ft. lbs.).
Using the sequence shown, tighten the cylinder head bolts 1 through 10 to 54 Nm (40 ft. lbs.).
Using the sequence shown, tighten the cylinder head bolts 11 through 15 to 20 Nm (15 ft. lbs.).
Using the sequence shown, rotate the cylinder head bolts 1 through 10 90°.
Using the sequence shown, tighten the cylinder head bolts 11 through 15 to 34 Nm (25 ft. lbs.).

CAMSHAFT GEAR

Tighten the camshaft phaser bolt (1) to 85 Nm (63 ft. lbs.).

INTAKE MANIFOLD





Using the sequence shown, tighten the intake manifold bolts to 12 Nm (9 ft. lbs.).

EXHAUST MANIFOLD





Install manifold bolts and tighten to 25 Nm (18 ft. lbs.) in the sequence shown.