Operation CHARM: Car repair manuals for everyone.
Home >> Dodge and Ram >> 2009 >> Viper SRT-10 V10-8.4L >> Repair and Diagnosis >> Powertrain Management >> Computers and Control Systems >> Crankshaft Position Sensor >> Service and Repair >> Crankshaft Position Sensor - Removal
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Crankshaft Position Sensor - Removal






REMOVAL






WARNING: Do not attempt to remove the crankshaft position sensor (CKP) when the engine is hot. The location of the CKP is near the exhaust manifold and may cause burn injuries from the extreme temperatures generated from the engine and exhaust system.

NOTE: The sensor is located at the passenger side near the middle of the block.

1. Remove nut (2) and heat shield (3) from stud (1).
2. Disconnect electrical connector (4) from CKP (5).
3. Remove sensor mounting stud (1) and CKP (5) from engine block.

pro multis · About Operation CHARM