Fuel Level Sensor - Removal

REMOVAL





1. Remove fuel pump module, Fuel Pump Module - Removal.





2. Push down on the tab (3) and slide fuel level sensor (1) down and off of the channel on the housing of the pump module.
3. Remove the fuel level sensor wires from the retaining tab (2) on the housing.





4. Disconnect fuel pump/level sensor connector (1).





5. Pull out the locking wedge.










6. Using a small screwdriver lift locking finger (1) away from terminal (2) and push terminal out of connector. Remove the fuel level sensor signal and ground terminals out of the connector.