Power Window Switch: Testing and Inspection

POWER WINDOW SWITCH

Any diagnosis of the Power Windows system should begin with the use of scan tool and the appropriate Diagnostic Service Manual.

Refer to the appropriate wiring information. The wiring information includes wiring diagrams, proper wire and connector repair procedures, details of wire harness routing and retention, connector pin-out information and location views for the various wire harness connectors, splices and grounds.

Remove the switch Power Window Switch - Removal. Using an ohmmeter, refer to the power window switch resistance test table to determine if resistance is correct. If the correct results are not obtained, replace the switch.

POWER WINDOW SWITCH CONTINUITY