Operation CHARM: Car repair manuals for everyone.
Home >> Dodge and Ram >> 2010 >> Caliber L4-2.0L >> Repair and Diagnosis >> Instrument Panel, Gauges and Warning Indicators >> Compass >> Service and Repair >> Compass Module - Removal
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Compass Module - Removal






REMOVAL






WARNING: Disable the airbag system before attempting any steering wheel, steering column, or instrument panel component diagnosis or service. Disconnect and isolate the negative battery (ground) cable, then wait two minutes for the airbag system capacitor to discharge before performing further diagnosis or service. This is the only sure way to disable the airbag system. Failure to follow these instructions may result in accidental airbag deployment and possible serious or fatal injury.

NOTE: RHD model shown in illustration. LHD model similar.

1. Disconnect and isolate the battery negative cable.
2. Remove the instrument panel cover, Instrument Panel Pad - Removal.
3. Remove the screws (6) securing the Remote Compass Module (RCM) (5) to the instrument panel.
4. Disconnect the RCM electrical connector (1) and remove the RCM from the vehicle.

pro multis · About Operation CHARM