Service Procedure

1. Place the passenger front door window in the full up position.

2. Open the passenger front door.





3. Remove the pull cup screw access cover (Figure 1).

4. Remove the pull cup retaining screw.





5. Using plastic trim stick C4755 or equivalent, carefully unsnap the bolster from the door panel (Figure 2).





6. Remove and discard the door lock rod that connects the outside door handle to the door latch (Figure 3).





7. Install the new door lock rod (Figure 4).

8. Snap the bolster onto the door panel.

9. Install the pull cup retaining screw.

10. Install the pull cup screw access panel.

11. Verify proper door operation.