Operation CHARM: Car repair manuals for everyone.
Home >> Dodge and Ram >> 2010 >> Challenger V8-5.7L >> Repair and Diagnosis >> Cruise Control >> Cruise Control Switch >> Service and Repair >> Speed Control Switch - Removal
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Speed Control Switch - Removal






REMOVAL






WARNING: Before servicing the steering column the airbag system must be disarmed. Refer to electrical restraint system for service procedures. Failure to do so may result in accidental deployment of the airbag and possible serious personal and/or fatal injury may result.

NOTE: Position the front wheels straight ahead.

1. Disconnect and isolate the negative battery cable before beginning steering wheel removal. Allow the front airbag system capacitor to discharge for two minutes before removing the steering wheel or any front airbag system component.
2. Remove the driver airbag (3) Driver Air Bag - Removal.
3. Disconnect the speed control switch electrical connector (2).
4. Remove the screw (1) from the front of the speed control switch (3).





5. Remove the screws (1) from the rear of the speed control switch (2).
6. Remove the speed control switch (2) from the steering wheel.

pro multis · About Operation CHARM