Cylinder Head Assembly
CYLINDER HEAD
M-12 Bolts
Step 1 34 Nm (25 ft. lbs.)
Step 2 54 Nm (40 ft. lbs.)
Step 3 Turn 90°
M-8 Bolts
Step 1 20 Nm (15 ft. lbs.)
Step 2 34 Nm (25 ft. lbs.)
SURFACE VARIATION - HEAD-TO-BLOCK
Inspect the cylinder head for out-of-flatness using a straightedge and a feeler gauge. If tolerances exceed 0.0508 mm (0.002 in.) replace the cylinder head.
INTAKE MANIFOLD
Intake Manifold Specifications
EXHAUST MANIFOLD
Exhaust Manifold Specifications
CAMSHAFT GEAR/SPROCKET
Camshaft Gear/Sprocket Specifications