Washer Fluid Level Switch - Removal

REMOVAL





1. Disconnect and isolate the battery negative cable.
2. Remove the washer reservoir (2) from the vehicle. Windshield Washer Reservoir - Removal.
3. Locate the washer fluid level switch in the side of the washer reservoir just above the washer pump/motor unit.
4. Firmly grasp and pull the washer fluid level switch outward far enough to disengage the barbed switch nipple from the rubber grommet seal in the reservoir. Care must be taken not to damage the reservoir.
5. Remove the washer fluid level switch from the washer reservoir.
6. Remove the rubber grommet seal from the washer fluid level switch mounting hole in the reservoir and discard.