Operation CHARM: Car repair manuals for everyone.
Home >> Dodge and Ram >> 2011 >> Dakota 4WD V6-3.7L >> Repair and Diagnosis >> Powertrain Management >> Computers and Control Systems >> Sensors and Switches - Computers and Control Systems >> Fuel Level Sensor >> Service and Repair >> Fuel Pump Module - Installation
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Fuel Pump Module - Installation






INSTALLATION

Special Tools:






CAUTION: Whenever the fuel pump module is serviced, the rubber O-ring seal must be replaced.





1. Using a new seal (gasket), position fuel pump module into opening in fuel tank.
2. Position lockring (5) over top of fuel pump module.
3. Rotate module until embossed alignment arrow points to center alignment mark. This step must be performed to prevent float from contacting side of fuel tank. Also be sure fuel fitting on top of pump module is pointed to drivers side of vehicle.
4. Install Lockring Remover/Installer (3) to lockring.
5. Install 1/2 inch drive breaker (1) into Lockring Remover/Installer (3).
6. Tighten lockring (clockwise) until all seven notches have engaged.
7. Install fuel tank. Fuel Tank - Installation

pro multis · About Operation CHARM