Instrument Panel Duct - Installation

INSTALLATION

NOTE: Take the proper precautions to protect the face of the instrument panel cover from cosmetic damage while performing this procedure.

NOTE: Illustrations shown with air outlets removed from view for clarity.





1. Position the instrument panel duct (2) to the instrument panel cover (4).

NOTE: If the foam seal on an air outlet is deformed or damaged, the seal must be replaced.

2. Connect the instrument panel duct the instrument panel air outlets. Be sure the duct is properly aligned and connected to both outlets.
3. Install the screws (1, 2 and 5) that secure the right side of the instrument panel duct (3) to the instrument panel cover (4). Tighten the screws securely.





4. Install the screws (1, 2 and 5) that secure the left side of the instrument panel duct (3) to the instrument panel cover (4). Tighten the screws securely.
5. Install the instrument panel demister ducts Instrument Panel Demister Duct - Installation.
6. Install the instrument panel cover Instrument Panel Cover - Installation.