Operation CHARM: Car repair manuals for everyone.
Home >> Dodge and Ram >> 2011 >> Durango 2WD V8-5.7L >> Repair and Diagnosis >> Brakes and Traction Control >> Drum Brake System >> Backing Plate >> Service and Repair >> Brake Backing Plate - Installation
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Brake Backing Plate - Installation






INSTALLATION






NOTE: A new backing plate assembly will have a plastic spacer to hold the park brake actuating lever in position to attach the brake cable. Do not remove the plastic spacer until the brake cable is attached to the lever.

1. Spread the shoes to fit over the stops and position the backing plate assembly (1) on the knuckle.
2. Install the backing plate bolts (2) and tighten to 13 Nm (116 in. lbs.).

NOTE: Remove the park brake lever spacer from this location (3) after attaching the brake cable, and before installing the rotor or adjusting the shoes.

3. Install the hub/bearing and knuckle Rear Hub And Bearing - Installation
4. Adjust brake shoes Adjustments
5. Install the wheel and tire assembly Service and Repair.

6. Remove the support and lower the vehicle.
pro multis · About Operation CHARM