Timing Cover

TIMING COVER


Align the locator pins (4) on the engine block to the engine timing cover and install the cover.
Install and tighten the timing cover attaching bolts:
Twenty-two M6 bolts 12 Nm (106 in. lbs.).
Two M8 bolts 25 Nm (18 ft. lbs.).
Three M10 bolts 55 Nm (41 ft. lbs.)






Apply a 2 to 3 mm wide bead of Mopar(R) Threebond Engine RTV Sealant to the front cover as shown in the following locations:
- Three cylinder head bosses (1)
- Right and left flanges (2)
- Four cylinder head to engine block T-joints (3)
- Cover to right cam chain tensioner gap (4)