Operation CHARM: Car repair manuals for everyone.
Home >> Dodge and Ram >> 2012 >> Challenger V8-5.7L >> Repair and Diagnosis >> Relays and Modules >> Relays and Modules - Lighting and Horns >> Headlamp Igniter Module >> Service and Repair >> High Intensity Discharge Ballast - Installation
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

High Intensity Discharge Ballast - Installation





INSTALLATION





1. Position the HID ballast module (1) near the mounting hole on the underside of the front lamp unit housing (4).
2. Reconnect the front lamp unit wire harness connector (2) and the high tension cable connector (3) to the module connector receptacles.





3. Position the ballast module (1) over the mounting hole of the lamp housing (2).
4. Install and tighten the four screws (3) that secure the ballast module to the underside of the front lamp unit housing. Tighten the screws securely.
5. Reinstall the front lamp unit into the vehicle. Front Lamp Unit - Installation
6. Reconnect the battery negative cable.
pro multis · About Operation CHARM