Operation CHARM: Car repair manuals for everyone.
Home >> Dodge and Ram >> 2012 >> Charger AWD V6-3.6L >> Repair and Diagnosis >> Heating and Air Conditioning >> Control Module HVAC >> Service and Repair >> A/C And Heater Control Module - Installation
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

A/C And Heater Control Module - Installation





INSTALLATION

NOTE: Illustration shown with instrument panel removed from view for clarity.





1. Position the A/C heater module (1) to the air inlet housing (4) and engage the module to the two front retaining screws (2).
2. Loosely install the screw (5) that secures the rear of the A/C heater module to the air inlet housing.
3. Tighten all the screws that secure the A/C heater module to the air inlet housing to 2 Nm (17 in. lbs.).
4. Connect the wire harness connector (3) to the A/C heater module.
5. Install the glove box trim panel and glove box Instrument Panel Glove Box - Installation.
6. Install the right side instrument panel silencer Silencer Panel - Installation.
7. Reconnect the negative battery cable.
8. Initiate the Actuator Calibration function using a scan tool .

pro multis · About Operation CHARM