Operation CHARM: Car repair manuals for everyone.
Home >> Dodge and Ram >> 2012 >> Charger AWD V6-3.6L >> Repair and Diagnosis >> Powertrain Management >> Computers and Control Systems >> Fuel Tank Pressure Sensor >> Service and Repair >> Fuel Tank Pressure Sensor - Installation
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Fuel Tank Pressure Sensor - Installation






INSTALLATION





1. The fuel tank pressure sensor seal (1) can be reused if not damaged.





2. Install the fuel tank pressure sensor (1) into the fuel tank vent tube and rotate until it locks into position.





3. Connect the fuel filler tube vent line (3) at the filler tube (4) and the fuel tank vent steel line (6).
4. Connect the fuel pressure electrical connector (1).





5. Position the rear wheelhouse splash shield (2) to the body and install the push-pins (1).
6. Install the left rear tire.

7. Lower the vehicle.




8. Connect the negative battery cable (1).

pro multis · About Operation CHARM